Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

         

123 Street Avenue, City Town, 99999

(123) 555-6789

email@address.com

 

You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

Blog

 

 

Filtering by Category: Tutorial

Tutorial: Using Single Fold Bias Tape to Hem a Circle Skirt

Niina Kivelä

Blog tutorial 2.JPG

Blogger: Natasha Chrismas

Hem a Circle Skirt with Bias Tape

Hemming a circle skirt can be tricky. However, Single Fold Bias Tape, can be used as a fun and easy way to finish a circle skirt.  To make it even better, it can add an interesting pop of color to the inside of the garment. Store bought bias tape works wonderfully and is the quickest method. Most Little Lizard King circle skirt patterns recommend using a 1/2’’ single fold bias tape for this purpose, such as the Sorrento Dress, Oxford Skirt, Arendelle and City Lights Skirt, but any width will do. Making your own bias tape may take a little extra time, but it also allows you to choose any fabric desired for the bias tape.  Have fun experimenting with different looks!


Unfold one side and align the bottom raw edge of the bias tape to the bottom raw edge of the skirt, right sides together.  Fold over the beginning edge of the bias tape 1/2’’ wrong sides together and pin in place.

Blog post 3.JPG

Continue pinning the bias tape around the circumference of the skirt.

Blog post 4.JPG

When you reach the starting point again, overlap the bias tape by 1/2’’ and trim.

Blog post 5.JPG

Sew along the first fold of the bias tape to secure.

Blog post 6.png

Press the bias tape down towards the bottom of the skirt, keeping the folded edge of the bias tape folded.

blog post 7.JPG

Fold it to the back to the wrong side of the skirt, repress the fold on the bias and pin in place.

Blog post 8.JPG

Stitch using a 1/8’’ seam allowance to secure. 

Blog post 10.JPG


The skirt is now hemmed, with no bias tape visible when right side out.

blog post 11.JPG











Tutorial: Rainbow Unicorn Malibu

Niina Kivelä

Photo1.jpg

Blogger: Rachel Iafigliola

Rainbow Unicorn Malibu

Hi, its Rachel and I am so excited to show you how to make your little girl’s unicorn wishes come true!

Photo2.jpg

I modified the Malibu pattern to create the sweetest rainbow unicorn dress for my
littlest. This blog post will show you how to make one for your unicorn loving little ladies!!
First you will need the ears and eyes from the Animazing Unicorn Add-on. For the
eyes I purchased an Iron-On Transfer sheet from Joann Fabrics and carefully traced and cut out the eye lashes. Using a pressing cloth I ironed them right onto the front bodice piece of the Malibu centering them as best as I could. 

Photo3.jpg

I made the ears using the instructions in the Unicorn Animazing pattern. I also purchased a 2” unicorn horn from Pamper your Princess on Etsy to use for the dress. This little horn could also be handmade as well.

Photo4.jpg

You will baste the unicorn facing down centered on the front bodice.  Then you will baste the ears onto the bodice. I used the strap placement mark and centered my ears at that location. If you want your ears to stick straight up you need to angle them as shown due to the curve of the bodice.

Photo5.jpg

Now follow the Malibu pattern to place the straps, back tie/bow, and elastic casing. When you sew the lining to the main bodice and get to the unicorn horn, instead of following the curve of the bodice you will sew straight across the unicorn. Finish the bodice according to the Malibu pattern and now you have a sweet unicorn face on the bodice of your dress!

photo6.jpg

Now to create the skirt. This may seem complicated, but I will do my best to explain. I used a soft nylon chiffon tulle to create the multi colored skirt. You can also use regular tulle. My skirt included two layers of multi colored tulle, one layer of white tulle for fullness and a lining layer. To create the multi colored skirt I pieced the skirt using five different colors of tulle.  I wanted each color on the front and back of the skirt so I used 10 pieces for each skirt layer. 

Photo7.jpg

To figure out the size of each piece of tulle you will add 8-10” to the width of the skirt pieces listed in the pattern. Divide that number by the number of tulle colors you are using for your skirt. Then you will add 1" to that width to account for the seam allowance. I did the size 2 width skirt with 5 tulle colors so here is my math:

36 + 10 = 46/5 = 9.2 + 1 = 10.2

So using this math I cut my skirt pieces at 10” width rounding down slightly. To figure out the length of each of the pieces I used the length in the pattern but since I do not need to hem the tulle I took off 1/2" from the listed length. So each of my tulle pieces were 11.5" x 10". After cutting the desired amount of tulle pieces (in my case 10 for each skirt layer), l laid them right sides together and sewed. Continue until all of your pieces are sewed together, then sew the first and last piece together to create a large loop. 

Photo8.jpg

After creating both of my multi colored layers I pinned them together at the top of the skirt and sewed 2 lines of gathering stitches at 1/4" and 3/8" through both layers. 

Photo9.jpg

Gather the multi colored skirt to the width of the bodice and these will be attached to the bodice first.

Photo10.jpg

Optionally you can gather and attach any additional tulle layers for fullness. Finally you will gather and attach your lining layer. One last note, for my lining layer I took off about 1/2" from the length of the skit pieces used in the pattern so that the tulle layers would be slightly longer than the lining. 


I can’t wait to see your beautiful unicorn creations!! These are a few of my favorite photos of my little one in her unicorn dress! 








 


 

What Does the Fox Say!?!

Liz King

We know how much you love the Animazing skirt pattern with all the adorable animal face add ons.  So, we thought you might enjoy having a fox face for a few dresses. Today we will show you how to use the free fox mask pieces on the site to create adorable fox face Bristol and Amsterdam dresses year round!! 

DSC_6841 copy.jpg
Bristol Fox

Let's start with Bristol.  Print and cut the bodice as normal.  In addition, print the free fox mask and cut 2 mirror image sets.

Bodice
Animal Face

Place one mirror image mask set, right sides together  Sew along the inside curve with 1/2" seam allowance.

DSC_7960.jpg

Flip the pieces, along the sewn edge, so the wrong sides are touching.  Press.   

DSC_7969.jpg

Place the mask pieces on the front bodice main. Topstitch the finished inner curve.  Position Baste to secure along the outer raw edges.  Follow the directions in the pattern to finish the dress. Add a button nose and eyes upon completion!  Get creative and use the face pieces as the base for another animal.  In addition, the Bristol sleeves could be omitted and the construction could be competed with the burrito roll method for a sleeveless version.

Follow the directions in the pattern to finish the dress. Add a button nose and eyes upon completion!  Get creative and use the face pieces as the base for another animal.  In addition, the Bristol sleeves could be omitted and the construction could be competed with the burrito roll method for a sleeveless version.

Follow the directions in the pattern to finish the dress. Add a button nose and eyes upon completion!  Get creative and use the face pieces as the base for another animal.  In addition, the Bristol sleeves could be omitted and the construction could be competed with the burrito roll method for a sleeveless version.

Follow the directions in the pattern to finish the dress. Add a button nose and eyes upon completion!  Get creative and use the face pieces as the base for another animal.  In addition, the Bristol sleeves could be omitted and the construction could be competed with the burrito roll method for a sleeveless version.

With this Bristol dress, I love the fact that the fabric colors worked perfectly for a fox dress or a raccoon dress (gray). Riley Blake's Heart & Soul collection was exactly perfect for this project! 

bristol fox

Get creative and use the face pieces as the base for another animal.  The same pattern piece was used for both dresses but simply changed the fabric colors to change up the animal -- from a fox to a raccoon.  

Suffice to say -- everyone's happy!!!

DSC_9453 copycurve.jpg
DSC_9428 copycurve.jpg

To create the Amsterdam fox, cut the bodice pattern pieces as usual.  In addition cut out 2 fox mask pieces. Place the mask pieces right sides together and sew each curve with a 1/2" seam allowance.

IMG_7033.jpg

Turn the mask piece right side out and press.

RSO press.jpg

Position the mask on the front main bodice and pin to secure. Baste in place along the finished curves.

plsce on bodice.jpg
IMG_7037.jpg
IMG_7038.jpg

Follow the construction direction in the pattern and embellish it when you are done. Amsterdam also has an adorable romper option so it can be made into a romper as well.  Get creative with your embellishments!  And if you want you can even make a matching animazing messenger bag!!!!

Can't wait to see all your little animals!!!!